The holes from the Filament Guide of Villamany did not match with those on my CTC. Others had same problems.
It looks like the producer changed the positions of the holes for some reason.
So i took the design of the original thing and made the holes fit to those on the printer.
Version 2.0: Repaired the STL file so the holes are actually round, not rectangular. Also reduced the distance of the holes by 0,5mm. They should fit nicely now.
Made for CTC / Replictor etc. Printer with a 6mm PTFE Guide Tube.
| Filament_Holder_2.0.stl | 937.2KB |
