Filament Drying-extension For Cylindrical Food Dehydrator 3D Printer Model
The file 'Filament Drying-extension For Cylindrical Food Dehydrator 3D Printer Model' is (fcstd,stl) file type, size is 4.2MB.
The file 'Filament Drying-extension For Cylindrical Food Dehydrator 3D Printer Model' is (fcstd,stl) file type, size is 4.2MB.
As filament rolls does not fit inside most cylindrical food dehydrators, I added a simple wall construction - you need two prints for one filament roll to fit. Several such walls can either be piggy-backed or set up with a dehydration grid in between.
The sides are printed including their own support, which can easily be detached later (but be a bit careful when doing it). It is done in this way, as the construction would otherwise start to wobble and bend during printing.
The sides can easily be joined by simply pressing them together (edges fit). Do not try to slide one edge into the other, as the construction might break. For detaching, just gently drag them apart. As the sides are printed thin, they are flexible and can easily be wrapped around the cylindrical food dehydrator for efficient storage.
| svamptorksida.fcstd | 4.2MB | |
| svamptorksida.stl | 401.4KB |
