Filament Dry Box Ikea Samla 22L And 65L Simple And Quick To Build 3D Printer Model
The file 'Filament Dry Box Ikea Samla 22L And 65L Simple And Quick To Build 3D Printer Model' is (stl,STL) file type, size is 37.5MB.
The file 'Filament Dry Box Ikea Samla 22L And 65L Simple And Quick To Build 3D Printer Model' is (stl,STL) file type, size is 37.5MB.
My version of the Samla filmant storage is a minimalist design which is simple and quick-and-easy to print.
Check out on YouTube how to build it, BOM with links in the description:
https://youtu.be/ohHSY2zMV_o
UPDATE: 22/10/2020
I had problems with the 65L version when fully loaded and wanted to move around because of the flexible bottom and weight the rods could slipped out from their place.
Now I made a V2 from the Stand leg where it is fully closed around the M8 Threaded rod so it has no more chance to slip out. By the small spools I had no issues like this.
I also made a stand leg for the hygrometer with slots to be more fancy.
You can also find 2 Assembly helper distance holder for both boxes to speed up the assembly process. Just slap it onto the M8 Threaded rod and turn the nuts for quick placements. They are for 88mm wide 1kg spools and 101 mm wide 2kg spools.
BOM for the 22l version for 1kg spools:
To print:
2x 22l_stand_leg_x2
2x 22l_stand_leg_mirrored_x2
1x 22l_hole_template_M3
8x washer /spool
1x PTFE_cap /spool
To buy:
1x 22l Samla box with cap
2x 338 mm M8 threaded rod (you can buy 1m and cut to the required length)
4x 608zz bearrings /spool
20 or 26x M8 thin nut (20 if you put 3 spools in the box or 26 if you can fit 4 in it)
8x M3x6 Screws
1 m 4 mm outer diameter PTFE tube
5 mm x 1 mm EPDM for the better isolation
1x temperature and humidity sensor
BOM for the 65l version for 2kg-2.6kg spools
To print:
2x 65l_stand_leg_x2_V2
2x 65l_stand_leg_mirrored_x2_V2
2x 65l_stander_middle_stabilizer or 6x if you want to be sure :)
2x 65l_stander_for_hygrometer
1x 65_hygrometer_frame
1x 65l_hole_template_M3
8x washer /spool
1x PTFE_cap /spool
To buy:
1x 65l Samla box with cap
2x 480 mm M8 threaded rod (you can buy 1-2m and cut to the required length)
4x 608zz bearrings /spool
20 or 26 or 42x M8 thin nut (20 if you put 3 spools in the box, 26 if you can fit 4 in it, 42 if you fix all staneder leg also with nuts)
8x M3x6 Screws
a few meter 4mm outer diameter PTFE tube
9 mm x 2 mm EPDM for the better isolation
1x temperature and humidity sensor
For the clips I printed this thingi with 1 cm height: https://www.thingiverse.com/thing:2110134
| 22l_67mm_long_assembly_helper_for_88mm_wide_spools.stl | 240.1KB | |
| 22l_hole_template_M3.STL | 31.3KB | |
| 22l_stand_leg_mirrored_x2.STL | 998.9KB | |
| 22l_stand_leg_x2.STL | 1000.6KB | |
| 65l_32mm_long_assembly_helper_for_101mm_wide_spools.stl | 170.0KB | |
| 65l_hole_template_M3.STL | 30.9KB | |
| 65l_Stander_for_hygrometer.STL | 24.5MB | |
| 65l_stander_middle_stabilizer.STL | 1.2MB | |
| 65l_stand_leg_mirrored_x2.STL | 963.1KB | |
| 65l_stand_leg_mirrored_x2_V2.STL | 26.8MB | |
| 65l_stand_leg_x2.STL | 964.8KB | |
| 65l_stand_leg_x2_V2.STL | 26.8MB | |
| 65_hygrometer_frame.STL | 1.9MB | |
| PTFE_cap.STL | 168.8KB | |
| washer.STL | 42.3KB |
