Filament Dry Box – Heated, Ventilated, Arduino Controlled 3D Printer Model
The file 'Filament Dry Box – Heated, Ventilated, Arduino Controlled 3D Printer Model' is (stl,txt) file type, size is 938.5KB.
The file 'Filament Dry Box – Heated, Ventilated, Arduino Controlled 3D Printer Model' is (stl,txt) file type, size is 938.5KB.
Bau einer beheizten und aktiv belüfteten Filament Trockenbox. Gesteuert durch einen Arduino Nano. Gebaut aus einer Ikea365 10,4L Vorratsbox, ein paar elektronische Teile und ein paar Teilen aus dem 3D-Drucker. Alle Teile sind leicht zu beschaffen und die Bauteilekosten betragen etwas über 50€.
How to build a heated and actively ventilated filament dry box. Controlled by an Arduino Nano. Built from an Ikea365 10.4L storage box, a few electronic parts and a few parts from the 3D printer. All parts are easy to obtain and the component costs are just over €50.
Partlist with links and additional infos is stored beside the stl files.
Software on GitHub: https://github.com/werner-rh/drybox-control
See also the circuit diagramm and assembly pictures.
| AirFlap-Front22mm01-ex.stl | 23.3KB | |
| AirFlap02-ex.stl | 47.9KB | |
| AirHeater-MountBase2-ex.stl | 72.0KB | |
| Axle-10x145mm-ex.stl | 49.3KB | |
| Axle-10x175mm-ex.stl | 49.3KB | |
| Cable-Clamp-ex.stl | 3.0KB | |
| DHT11-HolderV2-ex.stl | 2.2KB | |
| EHouse-Basebox-ex.stl | 179.6KB | |
| EHouse-BoxWasher-ex.stl | 99.9KB | |
| EHouse-Front-ex.stl | 115.9KB | |
| Encoder-Knob-Cap18-ex.stl | 35.0KB | |
| Encoder-Knob18-ex.stl | 35.5KB | |
| Fan-InnerMount-AirExchange-ex.stl | 249.7KB | |
| Fan-Outer-AirFlap-Mount-AirExchange-ex.stl | 277.8KB | |
| FanMount-AirHeater-ex.stl | 125.5KB | |
| FanMount-Drilltemplate-ex.stl | 149.3KB | |
| FetModule-Holder-ex.stl | 2.6KB | |
| FlapAxis-Lock-ex.stl | 23.3KB | |
| Front-Vent-InFlap-Mount-ex.stl | 209.8KB | |
| Front-Vent-Outer-Cover-ex.stl | 666.5KB | |
| FrontAir-Drill-Template-ex.stl | 173.9KB | |
| LCD-Frame16x2-V21.stl | 102.4KB | |
| LCD-Haltebolzen_ex.stl | 23.3KB | |
| MosFet-Modules-MountV2-ex.stl | 11.2KB | |
| Partlist-Info-Heated-DryBox.txt | 3.0KB | |
| PTC-AirHeater-Base-ex.stl | 34.5KB | |
| PTC-AirHeater-Top-ex.stl | 8.3KB | |
| Roll-Adapter-50-withBorder-ex.stl | 169.2KB | |
| Roll-Adapter-52-withBorder-ex.stl | 170.0KB | |
| Roll-Adapter-54-withBorder-ex.stl | 170.0KB | |
| Roll-Adapter-70-withBorder-ex.stl | 170.0KB | |
| Roll-Adapter-72-withBorder-ex.stl | 170.0KB | |
| Roll-Adapter-74-withBorder-ex.stl | 170.0KB | |
| Roll-Adapter-75-withBorder-ex.stl | 170.0KB | |
| RollholderBig-10mm-ex.stl | 101.4KB | |
| RollholderWasherBig-ex.stl | 186.0KB | |
| RollStand-Axle-Mount-ex.stl | 181.5KB | |
| RollStand-BoxMount-ex.stl | 31.5KB | |
| RollStand-Connector-ex.stl | 180.6KB |
![CadetYoke V2.0 [Open-Source Yoke For Flight Simulators] 3D Printer Model](https://cdn.3axis.co/assets/74/d6/01/aa/74d601aa-5153-4f25-bb8a-85d79b92292c/images/e3bb804f-b779-4e1a-b682-bbf658569414_thumb.jpg)
