The file 'Filament Dry Box Add-on – Interior Filament Port Filter / Silica Gel Container / Holder 3D Printer Model' is (STL) file type, size is 1.7MB.
These are screw together filament port filter containers which can hold small silica gel packs or filament filter / cleaning cloth. These were designed to be applied to the top lid mounts on this filament dry box (http://www.thingiverse.com/thing:961881). A 1.75mm and 3mm version has been provided. In my box I had to dremel the plastic inner rim to fit the curve of the interior filter box; if I had known prior that I was going to use this filament port filter I would have placed the holes a couple mm further from the interior lid rim.
12mm M3 Screws were used instead of the 8mm that I had prior.
Four extra .STL files have been added ending in "SM" that denote smaller holes so the silica beads will not escape.
| dryboxfilt_1.75_ID50_25mm_tube.STL | 562.4KB | |
| dryboxfilt_1.75_ID50_25mm_tubeSM.STL | 627.3KB | |
| dryboxfilt_1.75_ID50_cap.STL | 564.4KB | |
| dryboxfilt_1.75_ID50_capSM.STL | 594.7KB | |
| dryboxfilt_3.0_ID50_25mm_tube.STL | 555.2KB | |
| dryboxfilt_3.0_ID50_25mm_tubeSM.STL | 620.1KB | |
| dryboxfilt_3.0_ID50_cap.STL | 550.0KB | |
| dryboxfilt_3.0_ID50_capSM.STL | 603.8KB |
