Filament Box With Filler Spool Holder 3D Printer Model
The file 'Filament Box With Filler Spool Holder 3D Printer Model' is (f3z,step,stl) file type, size is 3.2MB.
The file 'Filament Box With Filler Spool Holder 3D Printer Model' is (f3z,step,stl) file type, size is 3.2MB.
Split version - I split the V2 box and lid into 4 separate stl files so that it can be printed on smaller printers. You will just need to glue the pieces together.
Version V2 - This version uses a custom Filler spool holder. I added 28mm to the depth of the box to fit the new Filler on this version. I looked at reducing the Filler width, but I decided not to because of all the different size spools that are out there.
Version V1 - I added 45mm to the depth of the box to fit the Filler spool holder. Also added a custom mount for the Filler spool holder. This version uses the original Filler if you don't care about the extra box depth.
I added the two STL files for the parts that I modified. The rest of the parts are unchanged from the original designs.
Help support my designs by using the affiliate links below.
Bearings for the spool holder: Amazon Link or AliExpress Link
M3 x 40mm Screws: Amazon Link or AliExpress Link
M4 x 8mm Screws: Amazon Link or AliExpress Link
| BoxFilament_Remix.f3z | 2.1MB | |
| BoxFilament_Remix.step | 2.2MB | |
| Clip.stl | 54.9KB | |
| Filament_box_body.stl | 303.3KB | |
| Filament_Box_Body_V2.stl | 321.4KB | |
| Filament_box_split_1.stl | 52.0KB | |
| Filament_box_split_2.stl | 85.8KB | |
| Filament_box_split_3.stl | 111.5KB | |
| Filament_box_split_4.stl | 107.2KB | |
| Filament_lid_split_1.stl | 55.8KB | |
| Filament_lid_split_2.stl | 55.8KB | |
| Filament_lid_split_3.stl | 59.3KB | |
| Filament_lid_split_4.stl | 59.3KB | |
| Filler_Spool_Holder_Mount.stl | 86.4KB | |
| Filler_Spool_Holder_V2.stl | 720.2KB | |
| Latch.stl | 78.9KB | |
| Lid.stl | 164.6KB | |
| Mount.stl | 229.7KB |
