An anti-humidity box to contain several rolls of filament.
There is a small pocket at the bottom for silica gel balls.
In my first design, I created only one hole for the filament to exit. However, since it was quite difficult to place the box, I revised the model by adding a straight line to the hole. You can see its old version in the pictures.
I believe that some of the heat generated by the printer while it is running remains inside the box, which keeps the filament dry.
It can be printed with support.
Creality CR Petg was used.
Printed at 240 degrees, 120mm speed.
It took 6 hours and 38 minutes.
A total of 261 grams were consumed.
The material thickness was set to 2mm. You can find other dimensions in the images.
| K1MaxFilamentCover.stl | 191.5KB |
