This is my concept of a Filament storage shelf.
I used 12 mm steel rods for the connection between the brackets, but you can also use wood or aluminium pipes. Maybe it will bend a bit in the middle in this case i also created an bracket to support the middle.
You shoud print this in ABS oder PETG. I didn´t tryed it in PLA
| Coverplate.stl | 68.0KB | |
| filabracket_left.stl | 592.1KB | |
| filabracket_right.stl | 590.9KB | |
| filabracket_supporting_part.stl | 611.6KB |
