EDIT 12/01/202
I have added an alternative version of the Earth Stones. I have made the grooves square to be closer to the original versions. These will need supports.
I've designed my own take on the Fifth Element elemental stones.
The internal part is hollow with a hole at the bottom to allow you to fill it in with cement or gypsum plaster or something like that if you wish to make them heavier.
The top of the design has an internal gradient so you should not need any supports on the inside.
The Fire stone and Earth stone should print without any supports.
You will need supports for the horizontal Water and Wind slots.
I have also made a version which can hold a tea light candle at the top if you want something more functional than ornamental.
I've made the license open so feel free to print/finish and sell the prints if you so choose.
They are 240mm tall so you will need a large printer. (I have a CR10s) or you can split and join if you so please.
I have not had time to print all of them yet, my printer is being occupied by another project but the 1st one came out pretty decent.
Please post pics :-)
| Earth_Stone_C.stl | 3.3MB | |
| Earth_Stone_Final_B.stl | 3.5MB | |
| Earth_Stone_Tea_Light_B.stl | 3.5MB | |
| Earth_Stone_Tea_Light_C.stl | 3.2MB | |
| Fire_Stone_Final_B.stl | 3.8MB | |
| Fire_Stone_Tea_Light_B.stl | 3.7MB | |
| Water_Stone_Final_B.stl | 2.6MB | |
| Water_Stone_Tea_Light_B.stl | 2.5MB | |
| Wind_Stone_Final_B.stl | 3.0MB | |
| Wind_Stone_Tea_Light_B.stl | 2.8MB |
