This is my take on the fidget spinners. I put the bearings a bit closer together than most so the 3 bearing spinner can fit in smaller hands. I've also included insertion and removal tools for the bearings which are handy for popping in and out 608 sized bearings. I've added a few additional versions with increased bearing diameters in case the fit is too tight. The files are named with the additional mm size added from 0.1mm - 0.4mm
You can access the Fusion 360 designs here:
| 608_2_Bearing_Spinner.stl | 703.4KB | |
| 608_2_Bearing_Spinner_+_0.1.stl | 719.5KB | |
| 608_2_Bearing_Spinner_+_0.2.stl | 719.5KB | |
| 608_2_Bearing_Spinner_+_0.3.stl | 715.4KB | |
| 608_2_Bearing_Spinner_+_0.4.stl | 735.6KB | |
| 608_3_Bearing_Spinner.stl | 788.9KB | |
| 608_3_Bearing_Spinner_+_0.1.stl | 799.5KB | |
| 608_3_Bearing_Spinner_+_0.2.stl | 799.5KB | |
| 608_3_Bearing_Spinner_+_0.3.stl | 821.3KB | |
| 608_3_Bearing_Spinner_+_0.4.stl | 821.7KB | |
| 608_4_Bearing_Spinner.stl | 874.3KB | |
| 608_4_Bearing_Spinner_+_0.1.stl | 892.9KB | |
| 608_4_Bearing_Spinner_+_0.2.stl | 892.9KB | |
| 608_4_Bearing_Spinner_+_0.3.stl | 892.9KB | |
| 608_4_Bearing_Spinner_+_0.4.stl | 917.2KB | |
| 608_5_Bearing_Spinner.stl | 1.1MB | |
| 608_6_Bearing_Spinner.stl | 1.7MB | |
| 608_7_Bearing_Spinner.stl | 1005.7KB | |
| 608_7_Bearing_Spinner_+_0.1.stl | 1007.1KB | |
| 608_7_Bearing_Spinner_+_0.2.stl | 1010.8KB | |
| 608_7_Bearing_Spinner_+_0.3.stl | 1010.8KB | |
| 608_7_Bearing_Spinner_+_0.4.stl | 954.8KB | |
| 608_End_Cap.stl | 314.3KB | |
| 608_Insertion_Tool.stl | 82.7KB | |
| 608_Removal_Die.stl | 119.4KB | |
| 608_Spinner.f3d | 94.9KB |
