Fidget Paw 3D Printer Model
The file 'Fidget Paw 3D Printer Model' is (stl) file type, size is 4.2MB.
The file 'Fidget Paw 3D Printer Model' is (stl) file type, size is 4.2MB.
A fidget toy shaped like a cute paw, using MX switches in each toe for satisfying clicks. it combines playful design with the tactile enjoyment of mechanical switches.
Requirements:
6X MX switch (recommended: Kailh Navy Box switches for their strong, satisfying click and heavy spring, but any MX switch should work).
Note:
The MX stem fits with a 90% success rate. If the fit is too loose due to under-extrusion, you can improve it by adding a piece of tape to the stem or printing it a bit smaller.
Printing Details:
This model is easy to print and requires no supports.
A premade brim for the MX stem is included and can be easily cut off (see images).
Print Settings: .12 Layer height, 15% infill, no brim, and no supports.
For Support and a Commercial license (selling physical prints) of this model, become a member of my Patreon:
https://www.patreon.com/MorphNest3D
| FidgetPaws_case.stl | 7.6MB | |
| FidgetPaws_middle.stl | 2.1MB | |
| FidgetPaws_tip_4X.stl | 809.4KB |
