Fidget Gears V2 Keychain Print In Place 3D Printer Model
The file 'Fidget Gears V2 Keychain Print In Place 3D Printer Model' is (stl) file type, size is 5.2 MB.
The file 'Fidget Gears V2 Keychain Print In Place 3D Printer Model' is (stl) file type, size is 5.2 MB.
Update 2029-07-21: added post print section.
After all the updates to my Anycubic I3 Mega-S printer I'm now able to print this at 100% size!
Updates on Printer were: TMC2208 Steppers, Marlin 1.1.9 Firmware, new part cooling.
Important parameter for print quality is "Outer walls before Inner walls"
Update 29.04.2019: fixed the issues in comments in "KeyChain2_"
This is a KeyChain Remix to not easily loose it.
Never again drain your Car-Keys Battery, as you have something else to play with :)
Printed _BasicSupport at 120% to have Name-Plate printable with 0.6mm nozle.
-ABS Innofil3D Silver
-ABS Ultimaker Black
-Concentric Support from BuildPlate, 1.4mm line distance
-25mm/s Wall speed (Slow)
-prints in 2.5hours
-1.75m Material 2.85mm Filament
I used Two Colors to proof it's printed in place ;)
Would like to see this printed in Rainbow Filament (but you would need more than 4 to have a smooth colorchange, as it's not that much filament :)
Please post a print if you like and tip the Designer :)
| Gears1_V8E_Keychain.stl |
| Gears1_V8E_Keychain2_BasicSupports.stl |
| Gears1_V8E_Keychain2_NoSupports.stl |
