This keyring was designed because I really liked my older, larger Fidget Gear Keyring, but found that it was a bit too big to use as a day-to-day keyring.
This keyring features a similar design, but only uses two gears, and both are the smaller, 15T 15PCD gears.
Updated 22/06/16: added STL's of the 15T gear with larger centre bore based on feedback that the holes were too small. There are now centre bores of 5, 5.4, 5.75 and 6.5mm. My testing shows that 5.4 and 5.75 work the best depending on what printer you use.
| 15tgear.STL |
| 15tgear540.STL |
| 15tgear575.STL |
| 15tgear650.STL |
| minibase_2.STL |
| minitop.STL |
