This is my own design of the Fidget Cube.
Parts list:
6xTactile switch - https://www.aliexpress.com/item/10-100-pieces-lot-6-6-7-SMD-tact-switch-6x6x7mm-SMT-micro-Black-button/32714736875.html?spm=2114.13010608.0.0.Z1VfaQ
1xSteel ball bearing - https://www.aliexpress.com/item/High-precision-G16-0-002mm-Stiffiness-62-Bearing-Steel-13mm-Antiacid-corrosion-resisting-bearing-ball/32343119889.html?spm=2114.13010608.0.0.Z1VfaQ
1xBearing 4x13x5mm - https://www.aliexpress.com/item/10PCS-LOT-624-624Z-624ZZ-ball-bearing-4-13-5-mm-4x13x5mm-chrome-steel-bearing/1831141476.html?spm=2114.13010608.0.0.Z1VfaQ
1xSmall rocker switch - you need this type https://www.aliexpress.com/item/Original-new-100-Taiwan-deliwei-imported-miniature-gold-pin-switch-toggle-switch-rocker-switch-type-2/32733294071.html?spm=2114.01010208.3.49.8rbQhh&ws_ab_test=searchweb0_0,searchweb201602_2_422,searchweb201603_1&btsid=e6dc3a60-5879-4834-a3c2-b898dd7b49fd
the plastic handle need to be removed
1 mm steal rod (see in the pictures)
The sixth tactile switch is located inside the ball holder
Important - glue the tactile switchs + "buttons" in their place first, and after that glue the "ball holder" (and remember to locate the sixth tactile switch and the steel ball bearing inside the 'ball holder" before gluing it)
| ball_holder_v3.STL | 84.5KB | |
| Body1.STL | 281.3KB | |
| Body2.STL | 198.9KB | |
| button.STL | 102.6KB | |
| button_support.STL | 85.3KB | |
| combination_pad.STL | 54.0KB | |
| joystick_pad.STL | 264.3KB | |
| joystick_support.STL | 8.5KB | |
| rocker_switch.STL | 136.3KB | |
| roller.STL | 232.3KB |
