A replacement roof hook for the Fiat X1/9.

I would print these sitting sideways so the forces do not act in tension on the layers. I have thickened the base up for a bit more strength.

Probably best to do it in something strong, a PA-CF or the like.

If you are worried about ultimate strength then one other project I will put up is a TPU sleeve to fit over the factory metal base.

PLEASE NOTE!!! The factory screws will be unsuitable for use as I have changed the design to take a cap screw. This is so the chamfer on the factory screw does not try and split the layers. You will need 8x M4x12 Socket head cap screws.

Let me know if you want more X1/9 parts modeled...