This is a 3d printable model of the Fiat 126 car which is scaled down from my previous 126 model and modified to be a toy. Can be built as a cable controlled car or even a wireless r/c car depending on your ability. The front wheels can be assembled as fixed or steerable as the maker prefers.
dont forget to add the pictures of your makes. Thanks.
https://www.youtube.com/watch?v=w4BJStt5DsY
https://www.youtube.com/watch?v=1EWmTH8t1LM
| Fiat_126p_-_axle_front_left-1.STL | 159.8KB | |
| Fiat_126p_-_axle_front_right-1.STL | 160.4KB | |
| Fiat_126p_-_Car_Body-1.STL | 1.7MB | |
| Fiat_126p_-_chassis-1.STL | 503.1KB | |
| Fiat_126p_-_dashboard-1.STL | 145.8KB | |
| Fiat_126p_-_front_left_steering_holder_bottom-1.STL | 51.3KB | |
| Fiat_126p_-_front_left_steering_holder_top-1.STL | 35.8KB | |
| Fiat_126p_-_front_right_steering_holder_bottom-1.STL | 51.1KB | |
| Fiat_126p_-_front_right_steering_holder_top-1.STL | 35.8KB | |
| Fiat_126p_-_glass_front-1.STL | 89.7KB | |
| Fiat_126p_-_glass_front_left-1.STL | 45.1KB | |
| Fiat_126p_-_glass_front_right-1.STL | 45.4KB | |
| Fiat_126p_-_glass_rear-1.STL | 61.6KB | |
| Fiat_126p_-_glass_rear_left-1.STL | 35.5KB | |
| Fiat_126p_-_glass_rear_right-1.STL | 35.2KB | |
| Fiat_126p_-_headlight_left-1.STL | 94.9KB | |
| Fiat_126p_-_headlight_right-1.STL | 94.9KB | |
| Fiat_126p_-_mirror_left-1.STL | 147.5KB | |
| Fiat_126p_-_mirror_right-1.STL | 146.4KB | |
| Fiat_126p_-_Seat_left-1.STL | 138.8KB | |
| Fiat_126p_-_Seat_right-1.STL | 137.1KB | |
| Fiat_126p_-_signal_left-1.STL | 49.3KB | |
| Fiat_126p_-_signal_right-1.STL | 46.1KB | |
| Fiat_126p_-_speedometer-1.STL | 191.6KB | |
| Fiat_126p_-_steering_rod-1.STL | 160.5KB | |
| Fiat_126p_-_steering_wheel-1.STL | 231.9KB | |
| Fiat_126p_-_wheel_left_front-1.STL | 302.9KB | |
| Fiat_126p_-_wheel_left_rear-1.STL | 302.9KB | |
| Fiat_126p_-_wheel_right_front-1.STL | 302.9KB | |
| Fiat_126p_-_wheel_right_rear-1.STL | 302.9KB |
