Video of the car in action:
https://www.youtube.com/watch?v=JWCcLZzG5E0

Summary

This is a remix of the FETtec Drift Car. The original Body didn't fit my electronics and doesnt fit an DJI AirUnit, so I made a much larger one.

I used the following print settings:

Chassis:

TPU (Sainsmart Shore 95A)100% infill0.16mm layer height

Shell:

PLA (Bavafil Black PLA)3 walls40% infill0.16mm layer height

Wheels:

TPU (Sainsmart 95A again)1 wall5 bottom/top layers0.12mm layer height0% infill (wheels need to be soft for some grip)

Bumpers:

TPU (Sainsmart 95A...)3 walls8 bottom/top layers0.16mm layer heightinfill doesn't really matter, it will be solid anyways

No Supports needed for any of the parts.

More info on the drifter car here
https://www.thingiverse.com/thing:4685352

My smaller (but still 20% wider than original) version:
https://www.thingiverse.com/thing:4692952

Manual here:
https://fettec.net/media/pdf/fd/c8/32/FETtec-Drift-Car-Manual.pdf

The car is extremely fun, can't get enough drifting action :D

Additional material needed:

Fettec 15A AIO (https://fettec.net/shop/fettec-mini-aio-15a?c=9)2306 or 2207 motors with low kv (the lower the better)Receiver of your choice (for example FrSky XSR)5V Step-Up (for Receiver)12V Step-Up (for Air Unit)Any 1S battery (18650 3000mAh are ideal, I am using these: https://www.akkuteile.de/lithium-ionen-akkus/18650/samsung/samsung-inr-18650-30q-3-6v-3-7v-3000mah-15a_100805_1325)M2 screws of various lengthsSome cables and XT30 plugs