Festool Kapex 120 EB Zero Clearance Fence Block 3D Printer Model
The file 'Festool Kapex 120 EB Zero Clearance Fence Block 3D Printer Model' is (stl) file type, size is 13.1KB.
The file 'Festool Kapex 120 EB Zero Clearance Fence Block 3D Printer Model' is (stl) file type, size is 13.1KB.
Festool Kapex 120 EB Zero Clearance fence block
I designed a 3D printed zero clearance block for Festool Kapex 120.
Similar to the Colliflower Cube only you don’t have to replace your rear fence.
Mine reuses the existing back two bolts for the throat plate.
It will cut straight on and bevels but you can't rotate the fence for miters otherwise the floating fence will run into the thing that's bolted to the throat plate.
Requires 2 new longer M4 0.7mm 20mm long (in total) bolts.
I just used 30% infill.
| Kapex_Cube.stl | 61.4KB |
