this is a mud guard for mtb.
For the installation are required a couple of zip ties.
It is 180mm wide, and 170mm long.
you can mount it on the fork, or on the upper chainstay.
I have tested the 0.6 version (0.6mm high) and it is flexible and strong enough.
the wider version is a couple of cm wider.
if you want to print the 0.9 version I ask you to post a photo, or a comment .
thanks
| 0.6mud_guard.stl | 55.3KB | |
| 0.6mud_guard_wider.stl | 67.1KB | |
| 0.9mud_guard.stl | 54.0KB |
