3 months ago from here I downloaded files on a cat feeder that has a small lever that the cat should press with a paw and drop some pellets of food. However, my cat is obviously very stupid :) and for three months now he cannot learn to press the feeder with his paw. Sometimes he presses his head and shoots 1-2 pellets :)) He will die of starvation while lying next to her, but he will not remember that he has to press her. 3 I have been showing him for months and teaching him to press her ... but ...
Another drawback is that on this feeder with the lever on the side, the pellets are clamped inside and sometimes they do not fall at all and I have to shake it!

That's why I designed this whole feeder myself at first. I called her the Feeding Cat for Silly Cats :)
Cats like to roll things around with a paw. That's why I designed it so that it rotates with the cat's paw while stirring the pellets inside so that they cannot be stuck permanently. I hope my stupid cat learns to spin it this time.
The feed drum is pulled up and the side cover is slammed off. It is filled with pellets, the lid is slammed back into place. The drum has two lateral grilles that should be assembled for the first time, and should be lightly pressed. Then they are no longer removed, they do not have to.
On the back foot, there are two openings with which you can clamp the feeder to a wider and heavier base so that it does not turn over and tear the cat apart.

So ... this is a feeder for stupid cats or puppies :)

Hi there!
There is a new slightly improved version 2.0
I recommend working on it! The files are in a separate archive when downloaded from here.
Whatever your version works, but version 2.0 is slightly optimized.

The feeder has been tried and worked, and the pellets do not get stuck, like many other feeders available here.
All you have to do is teach your stupid cat to spin the wheel with a paw :)

I sprinkled it on my feed for 2 days. I used a 0.8mm nozzle and 0.4mm layers. It came fast and sound.
If you print with a normal 0.4mm nozzle it will be very slow! :)

All the models I upload are free to use! But despite everything, you can thank me if you want by treating me to a beer or a coffee with juice :))
The time I spend creating, drawing, actually testing the models and correcting them sometimes takes an awful lot of my working and personal time...

Here is my personal bank account-
SWIFT: STSABGSF
BG11STSA93000018780159

With respect...