Still work in progress
Update01, 2020/9/20: Extended the wingtip to provide more yew stablization
Wing span: 558 mm
Empty weight: about 170 g
STL files are solid bodies, you need to use the build-in infill function in slicing software to structure the inside. Empty weight after printing should not be higher than 200 grams.
Conventional (without FC) takeoff weight: about 350 g
Battery: 2s ~1300 mah
Motor: 1806-2306 motor
I will do a test flight as soon as possible
Please leave a like if you like this project!
| controlSurf.stl | 185.3KB | |
| fuselage.stl | 2.2MB | |
| Mini_fpv.factory | 4.8MB | |
| motor.stl | 49.5KB | |
| nose.stl | 5.3MB | |
| wing.stl | 259.8KB | |
| wingtip01.stl | 80.2KB | |
| wingtip02.stl | 591.5KB |
