Fast Reload Kit For 6mm BB Schofield Revolver 3D Printer Model
The file 'Fast Reload Kit For 6mm BB Schofield Revolver 3D Printer Model' is (stl) file type, size is 397.0KB.
The file 'Fast Reload Kit For 6mm BB Schofield Revolver 3D Printer Model' is (stl) file type, size is 397.0KB.
This is a Fast Reload Kit for 1887 6mm BB Schofield Revolver.
-The assembling instructions are in the uploaded photos.
-Everything is specifically designed so that no supports required for anything (and for the BODYblocker.stl is mandatory not adding supports).
-You will need a standard rubber band for the upper part of the reload wheel and a common little spring that could fit in the hole (you can fit in place the spring by adding some glue if the diameter is slightly smaller)
-Capacity of 9 reloads (the average when you will also need to change the co2 bottle).
ATTENTION: The blocker1.stl and blocker2.stl are not the same, please see the openscad capture when it shows the pieces to differentiate them.
| blocker1.stl | 21.4KB | |
| blocker2.stl | 21.4KB | |
| BODYblocker.stl | 897.2KB | |
| extraction_axis_bullet.stl | 13.6KB | |
| extraction_base.stl | 145.0KB | |
| extraction_button.stl | 17.1KB | |
| tap.stl | 34.1KB | |
| wheel.stl | 207.1KB | |
| wheel_axis.stl | 13.6KB |
