This is a super super basic clothing divider. There are some better dividers out there, but I want fast and cheap. Thus this exists now.
I printed this on a 0.4 nozzle diameter at 3mm layer height within half an hour. Printing at that speed means a very ugly surface, however for the purpose of a rack divider it's good enough
Default settings assumes a 30mm hanger rack diameter. But if yours is different, you can customise it.
If printing with black fliament you need to have a white sticker to label it. If on a different colour, you can write labels on it instead with a black marker pen.
| 30mm_rack_diameter_clothing_hanger_divider.stl | 39.4KB | |
| clothing_rack_divider.scad | 362.0B |
