This clamp goes on the bottom end of the Fara-J antenna by VE6SFX. It takes the weight of the coax off the antenna's BNC connector and PCB, transferring it to the fabric of the strap.
NOTE: The clip needs to be printed on it's end for strength.
There is a channel and clip sized for RG-58 coax. The clip snaps in, clamping the coax to the assembly. If you're using a larger coax, you can use the clip channels and some zip ties.
The assembly clamps onto the strap with two M3x8mm screws.
| coax_strain_relief-Body.stl | 123.2KB | |
| coax_strain_relief-clamp_body.stl | 68.4KB | |
| coax_strain_relief-Clip_Body.stl | 639.9KB |
