Modified Medieval Castle by boldmachines to take fairy lights and a battery pack. Also modified for multicolor/material printing.
Assembly Instructions Available on Instructables here: https://www.instructables.com/Fantasy-Light-up-Castle/
(Mostly) No support needed - The only exception is under the front large towers on the castle part.
File Explainer:
- P1_Base.stl & P2_Castle.stl will create a single color set. They must be printed separately so that you can install (and replace) the battery-powered lights.
- Multicolor_Castle.3MF is an all-inclusive AM file. Two plates. Towers already setup for multicolor printing. Native file for those using BambuStudios. Should also work for any slicer that can take this standardized AM file type. This is the file I used to print mine.
- Multicolor_P1_Base.zip is a compressed folder containing all the individual STLs needed for a multicolor print of the Base in case you don't want to deal with the .3MF
- Multicolor_P2_Castle.zip is a compressed folder containing all the individual STLs needed for a multicolor print of the castle
