Fantasy Dicetower For Warcry, AoS (Improved) 3D Printer Model
The file 'Fantasy Dicetower For Warcry, AoS (Improved) 3D Printer Model' is (stl) file type, size is 47.1MB.
The file 'Fantasy Dicetower For Warcry, AoS (Improved) 3D Printer Model' is (stl) file type, size is 47.1MB.
Here is an updated version of my dicetower that I made a while ago.
It is better printable and needs less support material ;)
"Wall closed.stl" should be printed 6 times and "Wall open.stl" twice
The magnets used for the tower should be about 6-7mm in diameter and 2mm high.
| fence_1.stl | 2.2MB | |
| fence_2.stl | 3.3MB | |
| fence_3.stl | 2.2MB | |
| fence_4.stl | 3.0MB | |
| fence_5.stl | 4.5MB | |
| fence_6.stl | 6.5MB | |
| fence_7.stl | 6.9MB | |
| fence_8.stl | 4.3MB | |
| funnel.stl | 5.1MB | |
| Funnel_alternative.stl | 26.9MB | |
| Plattform_middle.stl | 3.2MB | |
| Plattform_top.stl | 4.7MB | |
| rubble.stl | 2.4MB | |
| Rubble_Support.stl | 4.6KB | |
| Wall_closed.stl | 5.6MB | |
| Wall_open.stl | 4.9MB |
