Support me at: https://www.paypal.com/paypalme/KLJohannessen
"the blows of the hammer can be heard throughout the day, and the heat from the forge felt from the nearby street. Here lies the finest (and only) blacksmith in the village. Arms, armament, but mostly wheels, are made for the townsfolk and the few adventurers passing through"
A fantasy inspired blacksmith, with many parts.
I've also listened to your requests. this kit comes with studs, that holds the pieces in place
doorways with sliding space for doors.
the small doorway requires a door with the dimensions: 30mm wide 45mm high 3mm thick
The large doorway requires: 45mm wide 45mm high 3mm thick
Perfect for laser cutting on a 3mm mdf piece.
The house consists of 3 parts: ground floor, 1st floor and 2nd floor roof.
All blacksmiths need a work area, and as such included is a multi-part bellows/furnace and a proper anvil.
Anvil is 1 piece, and may require supports
Furnace and bellows are multi-part and requires glue. They can be printed in place and do not require supports.
Happy hammering
| 1st_Floor.stl | 8.5MB | |
| 2nd_floor_roof.stl | 5.7MB | |
| Blacksmiths_Anvil.stl | 630.1KB | |
| Blacksmith_Bellows.stl | 1.2MB | |
| Furnace.stl | 1.4MB | |
| Ground_Floor.stl | 10.2MB | |
| Left_Side_Bellow.stl | 357.3KB | |
| Mid_Lower_Bellow.stl | 604.1KB | |
| Mid_Upper_Bellow.stl | 870.7KB | |
| Right_Side_Bellow.stl | 357.3KB |
