Here you can print 2x brackets so you can add your Fanatec handbrake onto your Fanatec shifter, can be fitted either side of the shifter and still allows access for the shifter tension adjuster, i printed in PLA and seems more than strong enough, the bracket allows for a 15 degree angle towards you so its more comfortable pulling on the handbrake,
You have 2 options to print, both options require the T-nuts and bolts supplied with the shifter,
Option 1, You will need to tap a M6 thread, hole is already the correct size, plus additional 2x M6x20mm bolts
Option 2, You will need additional 2x M6x20mm Bolts with Nuts
| Fanatic_handbrake_mod_V2_20mmxM6_Nut_Bolt.stl | 139.8KB | |
| Fanatic_handbrake_mod_V2_Unthreaded_M6.stl | 139.5KB |
