Fanatec CSL Pedal Bass Shaker Mount 3D Printer Model
The file 'Fanatec CSL Pedal Bass Shaker Mount 3D Printer Model' is (stl) file type, size is 63.4KB.
The file 'Fanatec CSL Pedal Bass Shaker Mount 3D Printer Model' is (stl) file type, size is 63.4KB.
Works with Fanatec CSL Pedals (should work for regular brake, LC brake, and accelerator) and the following 4Ohm 25W Vibration Speaker.
Each mount requires (2) M4x0.7x20mm screws and (1) M5x0.8x25mm hex bolt (with an 8mm head width and 4mm depth - should be pretty standard). I picked mine up at my local Ace Hardware for under $2.50/mount hardware.
If mounting to the brake pedal, you cannot use the bottom-most mounting position as it will interfere with the brake pedal hardware.
Similar mount install video
More info about using these bass shakers on your sim rig
| fanatecCslHapticMotorPedalMount.stl | 232.3KB |
