Fallout 4 – Vertibird VB-01 3D Printer Model Free Download

Description Files (38)

Summary

This is a remodeled game rip of the Fallout 4 Vertibird VB-01. It is fully printable. The motors and propellers turn.

I will upload a version without the windshield so you can print in clear and put them in.

Notes:

Chopping air frame reduces the MASSIVE amount of support for the inner cabin
Windows have been fixed and thickened for FDM printing. I will include a version for DLP. All other air frames in the payload need to have the shells THICKENED FOR FDM!. YOU HAVE BEEN NOTIFIED.
SIMPLE PROP means that the propeller lays flat on the build plate. The original model props have a trailing edge that makes is VERY hard to print
All surfaces thickened for FDM printing and smoothed for split model
Control panel fixed and details added
Side Gun mount may NOT be FDM printable - you will have to make your own
All inner parts removed, fixed and detailed
Air frame details added for engine radiators, main hull radiator and CHAFF dispenser
Wing Spacer must be used if you want the wings to rotate

Airframe_Gear_DOWN_FDM.stl	6.3MB
Airframe_Head.stl	10.1MB
Airframe_Head_No_Glass.stl	1.6MB
Airframe_Mid.stl	4.8MB
Airframe_SM.stl	3.5MB
Airframe_Tail1.stl	2.7MB
Airframe_Tail2.stl	998.0KB
Bench.stl	1.1MB
CockpitGlass.stl	11.6MB
Cockpit_Glass.stl	9.8MB
ControlPanel.stl	19.0MB
Elavators.stl	265.8KB
Front_Gear.stl	80.7KB
Front_Gear_UP.stl	123.9KB
GunBarrel_x2.stl	5.7MB
Gunmount.stl	90.4KB
Left_Right_Doors_Closed.stl	80.7KB
Left_Right_Doors_Closed_FDM.stl	1.2MB
Left_Right_Door_Open.stl	73.1KB
Left_Right_Door_Open_FDM.stl	1.2MB
Left_Wing.stl	1.5MB
Left_Wing_Simple_Prop.stl	1.5MB
Light_x2.stl	78.1KB
PropShaft.stl	49.7KB
Rear_Gear.stl	234.5KB
Rear_Gear_Humps.stl	16.1KB
Right_Wing.stl	1.5MB
Right_Wing_Simple_Prop.stl	1.5MB
Rudder.stl	121.1KB
Seat.stl	384.4KB
Seat_FDM.stl	1.2MB
TailHook.stl	1.2MB
TailHook_Split.stl	1.3MB
Tires_Struts.stl	165.3KB
VB-01_Vertibird.stl	21.0MB
VB01_Wing_Shaft.stl	62.6KB
WingSpacer.stl	68.3KB
Wing_Joint.stl	25.1KB