Falcon Heavy Smoke Stand 3D Printer Model
The file 'Falcon Heavy Smoke Stand 3D Printer Model' is (stl) file type, size is 9.9MB.
The file 'Falcon Heavy Smoke Stand 3D Printer Model' is (stl) file type, size is 9.9MB.
Remix of a remix! Combined 3 of pejvl's Falcon 9 rocket smoke stands https://www.thingiverse.com/thing:4683397 at different rotations, added pegs (which fit inside falcon engines) for my OCDed remix (link soon) of AstroNot's Falcon Heavy https://www.thingiverse.com/thing:4357356, and hollowed out the centers. Added in a port in the back for a 5.5mmx2.1mm 12v barrel socket. (panel mount with nut threading on from the front) Lit using 6 Oznium Amber Pre-wired superflux 4-chip LEDs. (Amazon) 3 are hot glued into the top and the other 3 are glued into the base. Honestly the 3 in the top are enough light for the effect but I don't listen to my own advice. Due to the leds being-pre wired, the resistors caused a major headache when installing the second set in the base. The base friction fits to the stand with pins attached to the base. It has holes to secure wires with small cable ties and a cover for the power port connections.
| Falcon_H_Smoke.stl | 33.9MB | |
| Falcon_H_Smoke_Base.stl | 207.1KB |
