Falcon 9 Pen (bic) 3D Printer Model
The file 'Falcon 9 Pen (bic) 3D Printer Model' is (stl) file type, size is 1.3MB.
The file 'Falcon 9 Pen (bic) 3D Printer Model' is (stl) file type, size is 1.3MB.
This Falcon 9 pen uses a cheap Bic Cristal pen, which can be easily removed. The fairing/cap is pressure fit but if it's not tight enough or too tight, you can put a small piece of clear type around it or sand it down. I've added two versions, one with the engines attached and one with the engines separate for more detailed printing :)
V2: this version is the same but it's a bit thicker (1.2mm instead of 0.8mm)
This remix was inspired by freebeeromg but I designed the whole thing from scratch. I might also try to make the end more smooth.
(PS: don't pay attention to my poor coloring skills, permanent marker kind of bleeds along the print lines)
| F9_Pen_engines_v2.stl | 949.6KB | |
| F9_pen_fairing_v2.1.stl | 751.6KB | |
| f9_pen_v2.stl | 152.6KB | |
| Falcon_9_pen_body_without_engines.stl | 150.7KB | |
| Falcon_9_pen_body_with_engines.stl | 279.8KB | |
| falcon_9_pen_cap.stl | 687.0KB | |
| Falcon_9_pen_engines.stl | 1.1MB |
