A cover for the Fairphone 2.
The bottom part comes in two different versions - with a silly logo and a clear one. If you want to make your own version feel free to use the .blend file.
The two halves keep together with a little (kind of) hook that fits in one of the openings of the inner frame of the phone. Watch out to not rip off your antenna-stickers from the inner frame when attaching the lower part of the cover. I really recommend printing it in some soft and flexible material.
There's a chance you'll have to use some scalpell or knife for the buttons and button-holes as they're pretty tight in tolerance.
edit: Attention! It seems my printers Z-steps/mm is wrong in the factory-FW and therefore makes every print taller by 1,25% which results in a cover too big for actual use. I'll have to rework the cover again for a better fit, so please wait until I did that or just stretch the bottom cover for ~2mm in Z-axis as a dirty workaround.
| cova119.blend | 2.0MB | |
| cova119_bottom.stl | 11.0MB | |
| cova119_bottom_logo.stl | 12.1MB | |
| cova119_buttons.stl | 41.4KB | |
| cova119_top.stl | 10.2MB |
