Factorio Spidertron 3D Printer Model
The file 'Factorio Spidertron 3D Printer Model' is (stl) file type, size is 26.4MB.
The file 'Factorio Spidertron 3D Printer Model' is (stl) file type, size is 26.4MB.
Spidertron Spidertron does whatever a Spidertron does
Needs only a little bit of supports you should be able to print the leg parts without supports with "engineered failure" cleaning up some of the small midair print spots
I connected the legs with an 8mm m3 screw threaded into the plastic
I highly recommend printing the flat ones but I included the uncut long leg just in case
also note the direction youre gluing the legs together making sure the leg forms an L shape with respect to where it attaches to the base
I put a spring in the legs to give them a little bounce but you could put a plug in there
I attached an image of the legs how to put them together snap the C ring around the small leg part and glue the yellow to yellow and carefully glue the blue to blue if youre going for bouncy
Added a smaller version that should print and assemble much easier. Doesnt require any extra hardware (other than glue)
only needs supports only under the front of the legs the rest should be bridging
| Factorio_Spidertron2_body.stl | 8.8MB | |
| Factorio_Spidertron2_Knee.stl | 419.3KB | |
| Factorio_Spidertron2_Leg.stl | 2.2MB | |
| Factorio_Spidertron2_Leg_Connector.stl | 912.8KB | |
| Factorio_Spidertron_smol_body.stl | 8.6MB | |
| Factorio_Spidertron_smol_leg.stl | 1.4MB | |
| Factorio_Spidertron_smol_leg_bolts.stl | 1.1MB | |
| Factorio_Spidertron_smol_leg_upright.stl | 1.0MB | |
| Factorio_Spidertron_Solid.stl | 30.8MB |
