For a long time I have wanted to make my friend a piece of wall art that represents the state she lives in. I also wanted it to look pretty and nice to look at so that she would actually want to put it in her apartment and show it off. So I decided I would make a outline of the state and do a facted pattern on top of it. i did run into some issues but overall it came out great. I made it to fit on most printers but you might have to scale it down a bit. I think I printed mine at 80% scale. If you want more of a topographical map look to the pattern then use .2 or .3 layer height. If you don't want that look then do .1.
This isnt intended to be put together as a map, this is meant to just be individual pieces. I am eventually gonna do all 50 states so stay tuned for that. Let me know in the comments if I should do one state before the other.
I use these filaments for my map project.
Protopasta-https://amzn.to/2NQSpn3
| Alaska.stl | 152.4KB | |
| Arizona.stl | 61.5KB | |
| California.stl | 130.7KB | |
| Hawaii_.stl | 118.3KB | |
| Hawaii_Connected.stl | 148.1KB | |
| Idaho.stl | 177.9KB | |
| Montana.stl | 154.5KB | |
| Nevada.stl | 129.5KB | |
| New_Hampshire.stl | 69.4KB | |
| New_York.stl | 153.8KB | |
| Oregon.stl | 77.1KB | |
| Pennsylvania.stl | 123.3KB | |
| Vermont.stl | 71.2KB | |
| Washington.stl | 413.8KB | |
| Wisconsin.stl | 148.3KB |
