Scope
The scope of this post is to design a respiratory mask that may be considered more accessible. These parts aim to provide an alternative option to the existing library of 3D printable face coverings with the hope of encouraging more people to wear face masks.
Design notes
-Features internal filter slots.
-Compatible with most glasses.
-The mask should be regularly cleaned and the filters should be regularly replaced.
To achieve a better fit, the mask may be:
-scaled in size
-heated with a hairdryer, heat gun or hot water to mold the mask to your face - Being careful to avoid burns!
Disclaimer: This is not a proven medical device nor has it been approved for usage by any accredited agency. By downloading these parts you accept full responsibility for any harm or damage that may result from the use or misuse of these parts or the information provided in this post. Use at your own risk.
Your kind feedback is greatly appreciated!
The design was informed by the many existing 3D printed face masks. Links to other face masks can be found below:
https://copper3d.com/hackthepandemic/
https://www.makethemasks.com/about-the-mask
https://sparc.industries/pages/3d-printable-hepa-face-mask
| face_mask.stl | 58.6MB | |
| Filter_insert_L.stl | 1.0MB | |
| Filter_insert_R.stl | 1.0MB |
