FABtotum – Spool Companions 3D Printer Model

Author: @
License: CC BY-SA
File formats: stl,zip
Download type: zip
Size:1.0MB

The file 'FABtotum – Spool Companions 3D Printer Model' is (stl,zip) file type, size is 1.0MB.

Summary

Update :
A new Spring Loaded Spool Lock is now available :
http://www.thingiverse.com/thing:1433989
It may replace the lock and the spring presented bellow


Here are the 4 best friends your spool can ask for :

- The Lock : Mandatory
The lock is there to make sure your spool is... well ... locked in place.

- The Roller Extender : Very Usefull
is meant to extend the original roller that comes with the FABtotum to allow the use of 1Kg spools.

- The Spring : Not mandatory but very usefull
Best pal of the lock, the spring is their to make sure that the lock will stay in place, no matter what (vibrations...). Best part is... if you already have the original lock from FABtotum, it will be compatible with this spring ;)

- The End Stops : Usefull
just to make sure that this spool doesn't slide off the rollers under any circumstances.


- The Spacers : Just in case
If you don't have screws small enought to fix the spring to your totum, these can be handy. 2 sizes : 7mm & 10mm


FABtotum_-_Spool_Companions_-_Endstop.stl 124.6KB
FABtotum_-_Spool_Companions_-_Lock.stl 622.0KB
FABtotum_-_Spool_Companions_-_Roller_Extender.stl 256.8KB
FABtotum_-_Spool_Companions_-_Spacer_10mm.stl 47.2KB
FABtotum_-_Spool_Companions_-_Spacer_7mm.stl 46.9KB
FABtotum_-_Spool_Companions_-_Spring.stl 155.6KB
FABtotum_-_Spool_Companions_SKP.zip 950.1KB