F-4 Weapons Panel And Knobs For DIY Button Box Arduino Pro Micro 3D Printer Model
The file 'F-4 Weapons Panel And Knobs For DIY Button Box Arduino Pro Micro 3D Printer Model' is (stl,dxf) file type, size is 934.1KB.
The file 'F-4 Weapons Panel And Knobs For DIY Button Box Arduino Pro Micro 3D Printer Model' is (stl,dxf) file type, size is 934.1KB.
This is an approximate recreation of the weapons panel from an F-4 Phantom for flight sim use.
I've included two variations of the front panel designed to be used with Dravemaker's excellent 'DIY Button Box Arduino Pro Micro' (https://www.thingiverse.com/thing:5521203)
Plain Panel.stl has the holes only. You can print labels seperately or use the included template file to make your own label sheet. It's possible to get a basic backlit effect with some LEDs if you print this using transparent PLA.
The two piece (Fascia and Rear Panel) files are an attempt at a engraved labels solution with the labels cut through. I was never happy with the look of this but I've included the files anyway.
The knobs are roughly the correct shape (which really helps in VR) and will fit onto a standard rotary encoder. The station select buttons are 12mm holes and I've used both momentary and latched buttons on mine. The toggle switch holes are sized for standard mini toggles, I use both two and three way switches.
| AWRU.stl | 2.3MB | |
| DEL.stl | 1.6MB | |
| Fascia_2_of_2.stl | 2.9MB | |
| JETT.stl | 1.7MB | |
| Plain_Panel.stl | 916.2KB | |
| Print_Template.dxf | 407.7KB | |
| QTY.stl | 797.2KB | |
| Rear_Panel_1_of_2.stl | 916.3KB | |
| WPN_SEL.stl | 1.0MB |
