This is my model of F-302 from Stargate franchize. Once again, the model is designed entirely by me and is meant to be assembled with no glue at all. (Though in my case I had to use a little bit of glue to fix a gap that appeared).
The assembly is relatively straith forward but you need to apply significant force in order to put all the pins into their respective holes. Once you do that, you will be surprised how sterdy it is.
For more info, see the video below.
https://www.youtube.com/watch?v=FiCr9S0OJ8U
| f_bottom_1_1x.stl | 479.4KB | |
| f_cockpit_1_1x.stl | 71.2KB | |
| f_cockpit_2_1x.stl | 205.1KB | |
| f_cockpit_3_1x.stl | 2.0KB | |
| f_connection_1_3x.stl | 172.5KB | |
| f_connection_2_1x.stl | 149.1KB | |
| f_connection_3_1x.stl | 85.0KB | |
| f_engine_1_1x.stl | 185.3KB | |
| f_engine_2_2x.stl | 143.4KB | |
| f_engine_3_1x.stl | 147.9KB | |
| f_engine_4_2x.stl | 105.4KB | |
| f_missile_4x.stl | 57.3KB | |
| f_pedestal_1_1x.stl | 56.7KB | |
| f_pedestal_2_1x.stl | 405.1KB | |
| f_pedestal_3_2x.stl | 56.1KB | |
| f_pedestal_4_1x.stl | 29.0KB | |
| f_tail_1_1x.stl | 248.1KB | |
| f_tail_2_1x.stl | 248.2KB | |
| f_top_1x.stl | 941.3KB | |
| f_top_2_1x.stl | 150.1KB | |
| f_wing_a_1x.stl | 665.8KB | |
| f_wing_b_1x.stl | 665.9KB | |
| f_wing_c_1x.stl | 89.0KB | |
| f_wing_d_1x.stl | 89.0KB | |
| f_wing_holder_2x.stl | 2.0KB | |
| xxx_-_f_302.stp | 4.9MB |
