F-16 throttle for PC simulator.
I printed it with Creality Ender 3 v2.
See attached Docx file with all project data.
It was assembled with an Arduino Leonardo board.
Code from here:
https://github.com/ValkA/f-16-throttle-joystick
(Thanks to ValkA)
Some remix parts are taken from here:
https://www.thingiverse.com/thing:4733645
https://github.com/JonahTsai/F16/tree/master/Throttle
(Thanks to Jflyer81)
VIDEO: https://www.youtube.com/shorts/u4Ut2HWRl0w
VIDEO on how to adjust controls setup in DCS: https://youtu.be/04r7eTb0fZ4
| 1_Alt_hatswitch_base_with_blocks.stl | 271.9KB | |
| 1_Alt_hatswitch_cap.stl | 120.0KB | |
| 1_Alt_hatswitch_stem.stl | 263.9KB | |
| 1_Comms_hat_alt.stl | 1.3MB | |
| 2_Ant-Elev-Wheel.stl | 3.3MB | |
| 2_AntElev-Collar.stl | 1.2MB | |
| 3_ManRNGUncage-Knob.stl | 1.6MB | |
| 4_MasonSlideBarrel.stl | 1.6MB | |
| 4_SPD-BRK-Cap.stl | 1.2MB | |
| 5_DogFight-Cap.stl | 529.3KB | |
| 5_MasonSlideBarrel.stl | 1.6MB | |
| 6_cursor_01.stl | 425.2KB | |
| 6_RDR-Collar.stl | 1.1MB | |
| Afterburner_Tooth_624ZZ_4x13x5.stl | 586.7KB | |
| BASE.stl | 788.8KB | |
| COVER.stl | 483.3KB | |
| DATA_F16_THROTTLE.docx | 3.5MB | |
| F16_THROTTLE_Assembled.stp | 45.4MB | |
| GEAR.stl | 671.0KB | |
| HAND_A.stl | 6.9MB | |
| HAND_B.stl | 7.9MB | |
| HAND_C.stl | 21.9MB | |
| HUB.stl | 632.6KB | |
| ROD_A.stl | 463.9KB | |
| ROD_B.stl | 522.2KB |
