-EXTRUSION 1- Https://www.instagram.com/3ddiscodave/ 3D Printer Model
The file '-EXTRUSION 1- Https://www.instagram.com/3ddiscodave/ 3D Printer Model' is (stl) file type, size is 7.0MB.
The file '-EXTRUSION 1- Https://www.instagram.com/3ddiscodave/ 3D Printer Model' is (stl) file type, size is 7.0MB.
-yourDroid PLA Filament Rosa/Pink
-Front grip made by
https://www.thingiverse.com/thing:4880645
-Best Magazine fit with Ares MP5 Plastic Mags.
-Wolverine Inferno Gen.2 HPA Module M4 Nozzle
-Cyma MP5 Type Magazine Lower has a wider Magwall distance (24mm)
-Use the HPA Module spacer for perfect HU Unit seal and distance to HU Unit
-MP5K 140mm Inner Barrel
-MAXX M4A HU Unit red
-Macaron 60° yellow HU Rubber
-Universal 117mm Aluminium Outerbarrel (APS i guess)
-EU HPA Fitting
-M5 Grub Screws
-M3 & M5 3D Inserts
-M6 & M4 cylinder pins
-I printed all my parts in 0,12mm & 100% infill
-My printer CR10S 30x30x45 cm
| Cyma_MP5_Mag_Lower.stl | 1.3MB | |
| Endcap.stl | 806.6KB | |
| Frontgrip-Tube-138mm.stl | 2.4MB | |
| Frontgrip-Tube-213mm.stl | 3.4MB | |
| Frontgrip-Tube-60mm.stl | 1.6MB | |
| Grip.stl | 2.0MB | |
| Grip_bottom_plate.stl | 72.2KB | |
| Grip_V2_CATI.stl | 2.5MB | |
| HeartMuzzleflashhider.stl | 1.4MB | |
| HPA_Modul_Endcap.stl | 118.4KB | |
| HPA_Modul_Housing.stl | 97.5KB | |
| HPA_Unit_Nozzle_spacer.stl | 35.0KB | |
| Lower.stl | 1.3MB | |
| Magazine_Button.stl | 44.7KB | |
| Magazine_Holder.stl | 49.6KB | |
| Normal-Flashhider.stl | 1.0MB | |
| Outerbarrel_Housing.stl | 182.7KB | |
| Safe_Lever.stl | 37.0KB | |
| Selector.stl | 31.0KB | |
| Trigger.stl | 123.8KB | |
| TriggerV1.stl | 131.0KB | |
| Trigger_Housing.stl | 30.9KB | |
| trigger_V2.stl | 203.3KB | |
| Upper-Tube-Type.stl | 1.6MB | |
| Upper.stl | 499.3KB |
