This is an extendable coatrack you can hang on your wall, and add as many hooks to, as you need, even after it is already screwed in place. Extension of the rack works with a puzzle-fit system, using as many parts as you need to get you desired length.
It's optimized for small printers with a minimum depth or width of 15 centimeters of the printbed.
The minimum dimension of the rack is 30 centimeters in length, therefore you have to use the parts "rail_right" and "rail_left" and click them together. For longer racks you can snap as many of the 15 centimeter "rail_middle" -parts in between as you like! Use three M3 screws per part to properly fix it to your wall.
The hooks can be later be slided onto the mount from the side, adding as many hooks as you want. The simple design even allows you to customize them with little effort.
| hook.stl | 5.3KB | |
| rail_left_end.stl | 19.4KB | |
| rail_middle.stl | 8.7KB | |
| rail_right_end.stl | 19.4KB |
