Warning! do not short the battery. Assamble with care. Fire hazard.
I do not take any responsibility for any accident cause by this design. Use it at your own risk.
This is a design of 12v lithium battery pack.
you can extend its volume by stack up more packs.
No spot welding needed. Only welding you need is the battery manage system.
Easy to assamble.
Welcome to modify it and make it safer and better.
This contain three files.
newBatteryPack12v-M-v3.STL : M piece, it is the main frame
newBatteryPack12v-S-v3.STL : S piece, it is the piece between two batteries
newBatteryPack12v-J-v3.STL : J piece, is the piece at the end of the battery pack to hold the spring contacts and also the connecting piece for extending the pack.
When you print you need 1xM piece, 2xS pieces and 2xJ pieces for each stack.
When you assamble you need to insert the 3 pairs of metal spring contact in to J piece first. Then you put 1xM and 2xS together, make sure they are faceing the correct direction. After that you can insert the two assambled J pieces. Make sure you have put the spring contact piece in the correct order and direction. otherwise there is risk of short the battery. After you assamble the piece. check it before you insert battery and stack them up. You can use two thin zip line to further secure the battery pack. the space of the zip line has been designed not overlap eachother.
Link for the metal spring contact from aliexpress: https://www.aliexpress.com/item/1005003428687965.html