This is a box battery for Evov DNA200 board.
External size are: 48x94x25 mm.
The total space for the lipo battery is: 32x76x21.
I design this for the Turnigy Nanotech 0.95 3S 25-50C (http://www.hobbyking.com/mobile/viewproduct.asp?idproduct=20389) but of course u can mount the lipo that u like (dependings of the size, of course).
To fix the circuit to the body u need 3 screw M1.6x5 o M2x5 mm.
The drip cap hole is 10 mm. If u need another size, ask for it in comments.
There are two fire button, one +1 mm from lateral, one (long) +2 mm from lateral.
Disclaimer: be sure what are u doing with a lipo 3s battery.
| body.stl | 1.2MB | |
| fire.stl | 374.3KB | |
| fire_long.stl | 346.8KB | |
| front_panel.stl | 180.4KB | |
| lateral_panel.stl | 66.1KB | |
| up_down.stl | 356.5KB |
