Evoguide ED50 Clamprings And Accessories Bars 3D Printer Model
The file 'Evoguide ED50 Clamprings And Accessories Bars 3D Printer Model' is (step,stl) file type, size is 5.0MB.
The file 'Evoguide ED50 Clamprings And Accessories Bars 3D Printer Model' is (step,stl) file type, size is 5.0MB.
This is a full kit of Tube rings and accessories for the Evoguide ED 50.
I was sick and tired of adjusting the original clamp ring bolts to align it all the time, so I designed my own and wanted a low profile so that it coud carry a PI/minicomputer, guideing etc. I did not make a bracket for autofocus since the backlash of the scope is huge and makes it hard to dial in.
Unless you dont like the height , I would suggest to either raise the space between the tube ring handlebar mount and the handlebar for more space to your fingers, current space is now 15 mm.
I have included STEP files in case you want to change some details.
All holes are 3.2 mm and can be threaded with M4 , I have done this and it workes fine, if you will have threaded incerts, teh holes might be needing adjustments.
( i used through bolts on the hinges , M3 mm and washers .
Enjoy and clear skies :-)
STL files from Prusa Slicer for Anycubic Kobra 2 Plus, so you need to slice them to your printer.
I printed mine in Silk PLA, but Carbon fiber PLA or Pet-g might be a better way to go. My work like a charm . :-)
| Accessories_Bar.step | 107.5KB | |
| Accessories_Bar.stl | 1.4MB | |
| Accessories_Bar2.stl | 1.4MB | |
| Acsessories_Bar2.step | 107.5KB | |
| Body1.stl | 684.0B | |
| Brace.stl | 1.5MB | |
| Brace_Lover_Vixen_mounting.step | 220.3KB | |
| Dew_Shield_mount.stl | 140.7KB | |
| Dew_Shield_mount_.step | 11.7KB | |
| Dew_shield_slider.step | 12.5KB | |
| Dew_shield_slider.stl | 169.4KB | |
| Dovetail_bar_solid.step | 61.3KB | |
| Dovetail_bar_solid.stl | 556.4KB | |
| Dovetail_Clamp_1.step | 593.9KB | |
| Finderscope.step | 442.1KB | |
| Finderscope_front.step | 46.9KB | |
| Finderscope_front.stl | 329.8KB | |
| Finderscope_Rear.step | 472.3KB | |
| Finderscope_rear.stl | 2.5MB | |
| Handle_Bar.step | 121.1KB | |
| Handle_Bar.stl | 1.5MB | |
| Shim_Brace.step | 10.4KB | |
| Shim_Dovetail_Bar.step | 9.7KB | |
| Shim_Dovetail_Bar.stl | 684.0B | |
| TuberingED50Hinged_Front_Upper.step | 256.6KB | |
| TuberingED50Lower.stl | 1.7MB | |
| TuberingED50Rear_Lower.step | 222.6KB | |
| TuberingED50Rear_Upper.step | 256.6KB | |
| TuberingED50_Front_Lower.step | 222.6KB | |
| TuberingED50_Upper.stl | 1.9MB |
