EVKEY MTC10 To AMPS Mount Hinged 3D Printer Model

Author: @
License: CC BY-NC-SA
File formats: stl
Download type: zip
Size:803.9KB

The file 'EVKEY MTC10 To AMPS Mount Hinged 3D Printer Model' is (stl) file type, size is 803.9KB.

Summary

This will allow you to mount the MTC10 on an AMPS mount (screws down from the device side)
It also has a hinge to allow for proper tilting.

You will also need:

  • 4 pcs M3x12 screws
  • 4 pcs M3 washer
  • 4 pcs M3 spring washer (grover)
  • 1 pcs M4 washer
  • 1 pcs M4 nylock nut
  • 1 pcs M4x35mm allen key screw
  • 4 pcs M4x20mm screws (lenght dependent on AMPS mount)
amps_mtc10_evkey_hinged_device.stl 790.8KB
amps_mtc10_evkey_hinged_device_split.stl 891.4KB
amps_mtc10_evkey_hinged_device_split_bot.stl 221.8KB
amps_mtc10_evkey_hinged_device_split_top.stl 669.7KB
amps_mtc10_evkey_hinged_plate.stl 561.8KB