The file 'Evil Robot Toy 3D Printer Model' is (stl) file type, size is 10.6MB.
Put Head and Pivots on Back posts and glue Front piece down to capture pieces
Tie string, elastic, or springs to arm and leg pivots to limit or control arms and legs movement
Pin limbs together with appropriate sized screws, nuts, and washers or print pins to connect limbs
Print x2 each Arm and Leg Pivots, Lower Arms and Legs, and Stompers
Good luck printing and have fun
| EvilRobotArmPivotIACJLD2023.stl | 1.8MB | |
| EvilRobotBackIACJLD2023.stl | 2.3MB | |
| EvilRobotClawIACJLD2023.stl | 2.6MB | |
| EvilRobotFrontIACJLD2023.stl | 7.6MB | |
| EvilRobotHeadIACJLD2023.stl | 6.6MB | |
| EvilRobotLegPivotIACJLD2023.stl | 2.6MB | |
| EvilRobotLowerArmIACJLD2023.stl | 950.4KB | |
| EvilRobotLowerLegIACJLD2023.stl | 936.8KB | |
| EvilRobotSawIACJLD2023.stl | 1.6MB | |
| EvilRobotStomperIACJLD2023.stl | 680.4KB |
