This is a 'remix' of:
https://www.thingiverse.com/thing:3602721
https://www.thingiverse.com/thing:4889240
I liked both ideas, especially the single file print with multiple colors of KiwiFil.
Inspired by both two artworks, I designed this version (the dog-edition) from scratch more as a joke, because we have a lot of dogs so we have to watch out sometimes where we walk for their '3D prints' ;).
If you use any modern slicer, there is a setting that you can enable so that your printer stops and asks you to replace the filament with a different color.
Here is a good instruction on how to do this with Cura:
https://www.instructables.com/How-to-Change-Filament-Mid-print-Using-Cura-48/
But I guess if you search on Google: 'change filament [name of your slicer]' you can get all the info you need.
I've used a layer height of 0.20mm and infill 100% and took me about 2 hours print (and scripted into Cura to change the filament at layer 11) but the time also depends on what size you print it eventually (you can change the scale). I would not print it too small, because then the text get to cropped up together.
You can stick it to anything with some 'Nano Tape'.
If you have any questions or run into problems, let me know!
Happy (dog) printing!
| Everyone_is_a_3D_printer_dog_edition.stl | 2.4MB |
