-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.
Hey guys.
Take a look to the new super awesome gun we created. She's name is Evelyne.
She has multiples firing configurations!
3D modeled using AutodeskFusion360 from an original design.
And now, how I print this?
1) Buy some jars. The design includes some jars to be printed if you can't find a suitable option. The sizes? 21mm diameter for the lateral jars and 30 mm diameter for the bigger one
2) Print everything and put aside all the gears, take a note that gear 1 has many components (gear 1.1, gear 1.2, gear 1.3...) and the same happens with the other gears.
3) Glue everything
4) Fill the jars! :)
| big_jar.stl | 503.5KB | |
| b_sight.stl | 89.7KB | |
| cannon.stl | 72.6KB | |
| conection_bigjar-pipe2copies.stl | 29.5KB | |
| dcorative_gearunder_mainbody_1.stl | 136.4KB | |
| f_sight.stl | 10.8KB | |
| gear1.1.stl | 204.9KB | |
| gear1.2.stl | 101.8KB | |
| gear1.3.stl | 36.8KB | |
| gear2.1.stl | 110.5KB | |
| gear2.2.stl | 57.3KB | |
| gear2.3.stl | 37.0KB | |
| gear3.1.stl | 227.9KB | |
| gear3.2.stl | 85.7KB | |
| gear4.1.stl | 476.1KB | |
| gear4.2.stl | 34.6KB | |
| gear5.1.stl | 37.8KB | |
| gear5.2.stl | 324.3KB | |
| gear5.3.stl | 333.7KB | |
| hammer.stl | 57.7KB | |
| handle.stl | 465.6KB | |
| handle_decoration.stl | 412.1KB | |
| handle_decoration_2.stl | 412.1KB | |
| handle_decoration_3.stl | 71.0KB | |
| handle_decoration_4.stl | 71.0KB | |
| jar_support2.stl | 140.7KB | |
| jar_support_1.stl | 59.8KB | |
| mainbody1.stl | 366.9KB | |
| mainbody2.stl | 204.5KB | |
| main_cylinder.stl | 99.5KB | |
| max_power.stl | 374.5KB | |
| morepower.stl | 299.0KB | |
| pipes1.stl | 866.4KB | |
| pipes2.stl | 930.9KB | |
| power.stl | 175.3KB | |
| prot.stl | 32.1KB | |
| small_jar.stl | 263.8KB | |
| w8_4_flash_1.stl | 444.9KB | |
| w8_4_flash_2.stl | 10.1KB | |
| whirlwind2copies.stl | 401.9KB |
