Wall mount for electric car charger connector. This lets the connector lay along the wall and angle down at 45 degrees to relieve wire strain. Should fit any standard US J1772 EV connector. Works great for my Smart ForTwo ED.
Print with 3-4 perimeters and 10-15% infill for strength. You will need fairly long screws to get this through the piece and into a stud or brick. I would not recommend screwing straight into drywall. If you do, make sure you have solid anchors. Rotate model in slicer per your printers best orientation.
You can find the original model on OnShape at https://cad.onshape.com/documents/6f43789d3efbf4f7cd8a54f6/w/e33763bcf996d99ef03ef52c/e/5b3625d688f1c0b860d5fc5e
| 45_deg_Flat_EV_Charger_Wall_Mount.stl | 1.0MB |
